Description
The Geissele Super Precision is a one-piece AR-15 scope mount machined from a single block of 7075-T6 aluminum. This is the 34mm ring, Standard length version in Desert Dirt Color (DDC), Geissele’s tan-brown anodize that matches their DDC rails and charging handles. The design is built around return to zero. The base spans seven Picatinny slots, four shear lugs sit in the rail slots to take recoil, and two nut-and-bolt clamps each put about 1,400 lb of clamping force on the rail, per Geissele.
Standard length places the rings about 0.63 in forward of the mount base. Rings are 0.75 in wide with 2.8 in between them, and the caps swap between towers without affecting precision. Finish is Type 3 hardcoat anodize. The black version is 05-417B, and Geissele also makes Extended and Hyper Extended lengths.
Heads up: Measure the straight tube section of your scope between the turret housing and the objective bell. Some compact 34mm LPVOs need the Extended mount to clear the 2.8 in inner ring spacing.
Specs
- Part number: 05-417S
- Ring diameter: 34mm
- Length: Standard, about 0.63 in forward extension
- Color: Desert Dirt Color (DDC)
- Material: 7075-T6 aluminum, one piece
- Finish: Type 3 hardcoat anodize
- Rail interface: 7 Picatinny slots, 4 shear lugs, 2 nut-and-bolt clamps at about 1,400 lb each (per Geissele)
- Ring spacing: 0.75 in ring width, 2.8 in inner, 4.3 in outer
- Made in: USA
Who it’s for
Shooters building a DDC or FDE rifle who run a 34mm LPVO and want the mount to match the rail. Same fit for 3-Gun, multigun, and Tactical Games as the black version.
Who should skip it
DDC costs about 25 dollars more than black for the same mount, so buy the 34mm Standard in black (05-417B) if color does not matter. 30mm tubes need the 30mm mount. If you need more eye relief, the 34mm Extended in DDC (05-405S) moves the rings another half inch forward.
